How To Combine UHF And VHF Antennas – Simple Steps
Your local television channels come to you through 2 types of antennas – VHF and UHF. Local affiliates usually prefer UHF but VHF is also quite common. There are some TV stations that prefer VHF.
How To Combine UHF And VHF Antennas
Usually, you either have a UHF antenna or a VHF one. This means that you have to decide which channels you want to watch. If you want to watch both, you will have to combine the antennas. This will give you access to all the local channels.
In this article, we will walk you through the steps to combine UHF and VHF but before that, it is important to know which frequency bands are being used in your area. You can speak to the broadcasters or you can check www.antennapoint.com to get all the details you need. If only 1 frequency is being used in your locality, you don’t need to combine the antennas. But, if both are being used, you will find this article very helpful.
How To Combine UHF And VHF Antennas
To start off with, make sure you have the following – an antenna combiner, a coax cable, a mast, and zip ties. You might also need a preamplifier to avoid signal interference. Now, follow the steps below:
- Test the reception so that you find the perfect spot for attaching the antenna.
- The VHF antenna will be at the bottom and the UHF antenna will be at the top, connected by the antenna combiner. This setup is important because the UHF will receive signals better from a height.
- Now, use the cable that comes from the combiner to connect the whole setup to the TV or the cable box.
- Keep in mind that the antennas must be facing the towers.
- Test the signals with this setup and see if you are getting all the channels. If the VHF signals are weak, you can rearrange them. VHF will go on top and UHF will be at the bottom.
- Use the zip ties to keep the cables in place once you are satisfied with the output.
People Also Ask
1) Can I Use A Splitter To Combine 2 Antennas?
Yes, you can.
2) Will A Splitter Work As A Combiner?
Yes, it should.
3) Can You Have 2 UHF Antennas?
Yes, you can. But, in most cases you don’t need 2 UHF antennas.
4) Can You Attach 2 Antennas To The TV?
You can use a combiner to attach 2 antennas together and then to the TV using the combiner’s cable.
It’s really not difficult to combine UHF and VHF antennas if you have the right combiner. If you have any doubts about the process, please feel free to let us know. All the best.
